1. X. Martinez, S. Oller and E. Barbero, 'Study of Delamination in Composites by Using the Serial/Parallel Mixing Theory and a Damage Formulation' Springer, ECCOMAS Series 'Mechanical Response of Composites', 2008.
2. E. J. Barbero, "Finite Element Analysis of Composite Materials" CRC, Boca Raton, FL, 2007.
3. E. J. Barbero, "Introduction to Composite Materials Design" Taylor & Francis, Philadelphia , PA, 1999.
4. L. A. Godoy and E. J. Barbero, "Inestabilidad De Compuestos Laminados: Modelado Computacional Mediante La Teoria General De Estabilidad Elastica" Editor: S. Oller (Spain), 2001.
5. E. J. Barbero, "Construction" Chapter 46, pp. 982-1003, in "Handbook of Composites", 2nd Ed., Stan Peters, Ed., Thompson Science/Chapman & Hall, 1998.
6. H. V. S. GangaRao and E. J. Barbero, "Construction, Structural Applications" a chapter in the International Encyclopedia of Composites, S. M. Lee, Ed., Vol. 6, 173-187, 1991.
Modular Fiber Reinforced Polymer Composite Deck System, US Utility Patent Number 6,455,131 issued September-24-2002.
Modular Fiber Reinforced Polymer Composite Deck System, US Utility Patent Number 6,544,624 issued April-08-2003.
· Xingbo Liu, Jing Xua, Ever Barbero, Wei-Di Cao, Richard L. Kennedy, Effect of thermal treatment on the fatigue crack propagation behavior of a new Ni-base superalloy, Materials Science and Engineering A xxx (2007) xxx–xxx.
· Jing Xu, Mark A Bright, Xingbo Liu, and Ever Barbero, Liquid Metal Corrosion of 316L stainless steel, 410 stainless steel, and 1015 carbon steel in a molten zinc bath, Metallurgical & Materials Transactions A, vol. 38(A), 2727—2736, November (2007).
· Ever J. Barbero, Prediction of Long-Term Creep of Composites from Doubly-Shifted Polymer Creep Data, J. Comp. Mater., 2007, xxx-xxx.
B. S.-J. Kang, Z. Yao, and E. J. Barbero, Post-Yielding Stress-Strain Determination Using Spherical Indentation, Mechanics of Advanced Materials and Structures, 13:129-138 (2006) (Jan).
Xu, J., Xingbo Liu,, Xiaogang Li, Ever Barbero, Chaofang Dong,, “Effect of Sn Concentration on the Corrosion Resistance of Pb-Sn Alloys in H2SO4 Solution,” Journal of Power Sources, 155 (April 2006) 420-427.
Barbero, E. J., Lonetti, P. and Sikkil, K. Finite Element Continuum Damage Modeling of Plain Weave Reinforced Composites, Composites part B, 37 (2006) 137-147 (March).
Barbero, E. J. and Ford, K. J. (2006) Determination of Ageing Shift Factor Rates for Field-Processed Polymers, SAMPE J. of Advanced Materials, 38(2) April, 7-13.
Barbero, Ever J.; Trovillion, J.; Mayugo, J.A.; Sikkil, K.K. Finite element modeling of plain weave fabrics from photomicrograph measurements, Composite Structures, v 73, n 1 (May) 2006, p 41-52
Liu, Xingbo, Xu, J., Deem, Nathaniel, Chang, Keh-Min, Barbero, Ever J., Cao, Wei-Di, Kennedy, Richard L., Carneiro, Tadeu, “Effect of Thermal-Mechanical Treatment on the Fatigue Crack Propagation Behavior of Newly Developed ALLVAC 718PLUS Alloy,” Superalloys 718-625-706 and Derivatives, E. A. Loria Ed., TMS (2006).
Barbero E. J., Greco F., Lonetti P. Continuum Damage-Healing Mechanics with Application to Self-Healing Composites, J. Damage Mechanics, 14(1):51-81, January 2005.
Liu, X., L. Ma, K-M Chang and E. Barbero: “Fatigue Crack Propagation of Ni-base Superalloys”, Acta Metallurgica Sinica (English Letters), 18 p.55-64, February 2005.
Barbero, E. J., Damiani, T. M., Trovillion, J., Micromechanics of fabric reinforced composites with periodic microstructure, Int. J. of Solids and Structures, 42 (2005) 2489-2504.
Barbero, E. J., Abdelal, G. F., Caceres, A. A Micromechanics approach for damage modeling of polymer matrix composites, Composite Structures, 67 (2005) 427-436.
X. Liu, E. J. Barbero, M. Burris, K-M. Chang, and V. Sikka, Liquid Metal Corrosion of 316L Fe3Al and FeCrSi in Molten Zn-Al Baths, TMS Metallurgical and Materials Transactions A, ,36(a), (August 2005) 2049-2058.
Xu, J., X. Li, X. Liu, C. Dong, N. Deem, and E. J. Barbero, X-ray photoelectron spectroscopy study of passive layers formed on Pb-Sn and Pb-Sb alloys, TMS Metalurgical Transactions A, 36(a) (August 2005) 2175-2190.
Barbero, E. J. and Rangarajan, S., Long-Term Testing of Trenchless Pipe Liners, ASTM Journal of Testing and Evaluation, 33 (6), (Nov. 2005) 377-384.
Barbero, E. J. and Julius, M. J. Time-Temperature-Age Behavior of Commercial Polymer Blends and Felt Filled Polymers, J. of Mechanics of Advanced Materials and Structures, volume 11, No. 3, pp. 287-300, May-June.
Barbero, E. J. and Ford, K. J. Equivalent Time Temperature Model for Physical Ageing and Temperature Effects on Polymer Creep and Relaxation, ASME J. Eng. Mat. and Technology, vol. 126, pp. 413-410, October.
Liu, X., Kang, B., Carpenter, W. and Barbero, E. Investigation of the Crack Growth Behavior of Inconel 718 by High Temperature Moiré Interferometry, J. of Materials Science, 39 (2004) 1967-1973.
Long, Z., Liu, X, Yang, W., Chang, K-M, and Barbero E. J. Thermodynamic assessment of liquid composition change during solidification and its effect on freckle formation in superalloys, Materials Science and Engineering A 386, pp. 254-261.
Barbero E. J., Irwin, C., Liu, X, Sikka, V. and Goodwin, F. Development of the Next Generation of Bath Hardware Materials, Iron and Steel technology vol. 10, pp. 31-37.
Barbero, E. J. and Wen, Ed A. (2003), Autofrettage to Offset Coefficient of Thermal Expansion Mismatch in Metal-Lined Composite Pipes, ASTM STP 1436, Composite Materials: Testing and Design: 193-204, ASTM, PA. Paper ID 19068.
Barbero, E. J. and Damiani, T. (2003) Interaction Between Static Fatigue and Zero- Stress Aging in E-glass Fiber Composites, ASCE J. Composites for Construction, 7(1): 3-9.
Barbero, E. J. and Damiani, T. (2003) Phenomenological Prediction of Tensile Strength of E-Glass Composites from Available Aging and Stress Corrosion Data, J. Reinforced Plastics and Composites, 22(4): 373-394.
Lonetti, P., Barbero, E. J., Zinno, R., and Greco, F., (8/2003) Interlaminar Damage Model For Polymer Matrix Composites, J. Composite Materials, 1485-1504, 37(16). ERRATA.
Barbero, E. J. and Lonetti, P. An Inelastic Damage Model for Fiber Reinforced Laminates, J. Composite Materials, April 2002; 36(8):941-962.
Barbero, E. J. and Wen, Ed A. (2002) Compressive Strength of Production Parts without Compression Testing, ASTM STP 1383 Composite Structures: Theory and Practice, 470-483, ASTM, PA.
Abdelal, G. F., Caceres, A., Barbero, E. J. A Micromechanics Damage Approach for Fatigue of Composite Materials, J. Composite Structures, 56(4) 2002 413-422.
Barbero, E. J. and DeVivo, L. (2001) A Constitutive Model for Elastic Damage in Fiber-Reinforced PMC Laminae, J. of Damage Mechanics, 10(1) 73-93.
Barbero, E. J. and Lonetti, P. (2001) Damage Model for Composites Defined in Terms of Available Data, Mechanics of Composite Materials and Structures, 8(4), 299-316.
Barbero, E. J. and Turk, M. (2000) Experimental Investigation of Beam-Column Behavior of Pultruded Structural Shapes, J. Reinforced Plastic and Composites, 19(2), 249-265.
Qiao, P, Barbero, E. J., and Davalos, J. F. (2000) On the Linear Viscoelasticity of Thin-Walled Laminated Composite Beams, J. Comp. Materials, 34(1), 39-68.
Barbero, E. J. (2000) Prediction of Buckling-Mode Interaction in Composite Columns, Mechanics of Composite Materials and Structures, 7(), 269-284.
Barbero, E. J., Dede, E. and Jones, S. (2000) Experimental Verification of Buckling-Mode Interaction in Intermediate-Length Composite Columns, I. J. Solid Structures, 37(), 3919-3934.
Barbero, E. J., Compressive Strength of Composites for Aircraft Structures, World Market Series Business Briefing-Global Aerospace Technology, 96-100, London, 2000.
Barbero, E. J. and DeVivo, L. (1999) Beam-Column Design Equations for Wide-Flange Pultruded Structural Shapes, ASCE J. Composites in Construction, 3(4), 185-191.
Barbero, E. J., Makkapati, S., and Tomblin, J. S. (1999) Experimental Determination of Compressive Strength of Pultruded Structural Shapes, Composite Science and Technology, 59, 2047-2054.
P. Qiao, J. F. Davalos, E. J. Barbero and D. Troutman, Step-by-Step Engineering Design Equations for FRP Structural Beams, Modern Plastics.
Massa, J. and Barbero E. J., A Strength of Materials Formulation for Thin Walled Composite Beams with Torsion, Journal of Composite Materials, 32(17), 1560-1594 (1998).
Barbero, E. J. and Trovillion, J., Prediction and Measurement of Post-Critical Behavior of Fiber Reinforced Composite Columns, Composite Science and Technology, special issue on Civil Infrastructural Applications of Composite Materials, 58(8), 1335-1341 (1998).
Harris, J. and Barbero E. J., Prediction of Creep Properties of Laminated Composites from Matrix Creep Data, J. Reinforced Plastics and Composites, vol. 17(4), 361-379 (1998).
Qiao, P., Davalos, J. F., and Barbero, E. J., Design Optimization of Fiber Reinforced Plastic Composite Shapes, J. Composite Materials, J. Composite Materials, 32(2), 177-196, 1998.
Barbero, E. J. (1998) Prediction of Compression Strength of Unidirectional Polymer Matrix Composites, J. Composite Materials, 32(5), 483-502.
Godoy, L. A., Almanzar, L. I. y Barbero, E. J. (1998). Postbuckling and First Ply Failure of Thin Walled Frames and Columns Made of Composite Materials, in: S. Shanmugam et al. Ed., Thin-Walled Structures: Research and Development, Elsevier, Oxford, pp. 297-303.
Tomblin, J. S., Barbero, E. J., and Godoy, L. A., Imperfection Sensitivity of Fiber Micro-Buckling in Elastic-Nonlinear Polymer-Matrix Composites, I. J. Solid Structures, 34(13), 1667-1679 (1997).
Tomblin, J. S., and Barbero, E. J., Statistical Microbuckling Propagation Model for Compressive Strength Prediction of Fiber Reinforced Composites, ASTM STP 1242 (1997).
Barbero, E. J. and Godoy, L. A., Influence of Bending-Extension Coupling on Buckling of Composite Columns, Mechanics of Composite Materials and Structures, 4(3), 191-207 (1997).
Kim, Y., Davalos, J. F. and Barbero, E. J., Delamination Buckling of FRP Layer in Laminated Wood Beams" Composite Structures, 37(3-4), 311-320 (1997).
E. J. Barbero, L. A. Godoy, and I. Raftoyiannis, Finite elements for three-mode interaction in buckling analysis, I. J. Num. Methods Engineering, 39, 469-488, 1996.
Kim, Y., Davalos, J. F., and Barbero, E. J., "Progressive Failure Analysis of Laminated Composite Beams," J. Composite Materials, 30(5), 536-560, 1996.
Davalos, J. F., Salim, H. A., Qiao, P., Lopez-Anido, R. and Barbero, E. J., "Analysis and Design of Pultruded FRP Shapes under Bending," Composites Part B, 27B, 295-305, 1996.
Barbero, E. J. and Tomblin, J. "A Damage Mechanics Model for Compression Strength of Composites," I. J. Solid Structures, 33(29), 4379-4393, 1996.
Davalos, J. F., Qiao, P., and Barbero, E. J., Multi-objective Materials Architecture Optimization of Pultruded FRP I-Beams, Composite Structures, 35(3), 271-281, 1996.
Sonti, S.S.; Barbero, E.J. Material Characterization of Pultruded Laminates and Shapes, Journal of Reinforced Plastics and Composites, v 15, n 7, Jul, 1996, p 701-717.
R. Luciano and E. J. Barbero, "Analytical Expressions for the Relaxation Moduli of Linear Viscoelastic Composites with Periodic Microstructure," ASME J. Applied Mechanics, 62(3), 786-793, (1995)
Sonti, S., Barbero, E. J., and Winegardner, T., "Determination of Shear Properties for RP Pultruded Composites," J. Reinforced. Plastics. and Comp., 14, 390-401, (1995)
E. J. Barbero, R. Luciano, and E. Sacco, Three-Dimensional Plate and Contact/Friction Elements for Laminated Composite Joints, Computer and Structures, 54(4), 689-703, (1995).
R. Luciano and E. J. Barbero, "Formulas for the Stiffness of Composites with Periodic Microstructure," Int. J. of Solids Structures, 31(21), 2933-2944, (1995).
R. Lopez-Anido, J. F. Davalos, and E. J. Barbero, "Experimental Evaluation of Stiffness of Laminated Composite Beam Elements under Flexure," J. Reinforced Plastics and Composites, 14(4), 349-361, (1995).
E. J. Barbero and R. Luciano, "Micromechanical Formulas for the Relaxation Tensor of Linear Viscoelastic Composites with Transversely Isotropic Fibers," Int. J. of Solids Structures, 32(13), 1859-1872, (1995).
L. A. Godoy, E. J. Barbero, and I. Raftoyiannis, "Interactive Buckling Analysis of Fiber-Reinforced Thin-Walled Columns," J. Composite Materials, 29(5), 591-613, (1995).
L. A. Godoy, E. J. Barbero, and I. Raftoyiannis, "Finite Elements for Post-Buckling Analysis-Part I: W-Formulation," Computer and Structures, 56(6), 1009-1017, 1995.
E. J. Barbero, I. Raftoyiannis, and L. A. Godoy, "Finite Elements for Post-Buckling Analysis-Part II: Applications to Composite Plate Assemblies," Computer and Structures, 56(6), 1019-1028, 1995.
Raftoyiannis, I., L. A. Godoy, and E. J. Barbero, "Buckling Mode Interaction in Composite Plate Assemblies," Applied Mechanics Reviews, 52-60, 48 (11, Part 2), November (1995).
J. F. Davalos, Y. Kim, and E. J. Barbero, A layerwise beam element for analysis of frames with laminated sections and flexible joints, J. Finite Elements in Analysis and Design, 19, 181-194, (1995).
R. Zinno and E. J. Barbero, Total Lagreangean Formulation for Laminated Composite Plates Analyzed by 3D Finite Elements with 2D Kinematic Constraints, Computers and Structures, 57(3), 455-466, 1995.
E. J. Barbero, Structural Design Equation for FRP Columns, Materials Engineering, 6(1-2), 197-210, 1995.
E. J. Barbero and I. Raftoyiannis, "Lateral and Distortional Buckling of Pultruded I-Beams," Composite Structures, 27, 261-268, 1994.
J. Tomblin and E. J. Barbero, "Local Buckling Experiments on FRP Columns," Thin-Walled Structures, 18, 97-116, 1994.
E. J. Barbero and J. Tomblin, "A Phenomenological Design Equation for FRP Columns with Interaction Between Local and Global Buckling," Thin-Walled Structures, 18, 117-131, 1994.
E. J. Barbero and R. Zinno, "Analysis of laminated composite plates with three-dimensional layer-wise constant shear elements," International Journal of Engineering Analysis and Design, 1, 189-214, 1994.
Y-C. Kim, J. F. Davalos, and E. J. Barbero, "Composite beam element with layerwise plane sections," ASCE Journal of Engineering Mechanics, 120(5), 1160-1166, May 1994.
R. Zinno and E. J. Barbero, "A three-dimensional layer-wise constant shear element for general anisotropic shell-type structures," Int. J. for Numerical Methods in Engineering, 37, 2445-2470, 1994.
J. F. Davalos, Y-C. Kim, and E. J. Barbero, "Analysis of laminated beams with a layer-wise constant shear theory," Composite Structures, 28, 241-253, 1994.
E. J. Barbero, J. F. Davalos, and U. M. Munipalle, "Bond Strength of FRP-Wood Interface," J. of Reinforced Plastics and Composites, 13(9), 835-854, 1994.
E. J. Barbero and I. Raftoyiannis, "Local Buckling of FRP Beams and Columns," ASCE J. of Materials in Civil Engineering, 5(3), 339-355, 1993.
E. J. Barbero, R. Lopez-Anido, and J. F. Davalos, "On the mechanics of thin-walled laminated composite beams," Journal of Composite Materials, 27(8), 806-829, 1993.
E. J. Barbero and K. Kelly, "Predicting High Temperature Ultimate Strength of Continuous Fiber Metal Matrix Composites," Journal of Composite Materials, 27(12), 1214-1235, 1993.
E. J. Barbero and I. Raftoyiannis, "Euler Buckling of Pultruded Composite Columns," Composite Structures, 24, 139-147, 1993.
E. J. Barbero and J. Tomblin, "Euler Buckling of Thin-Walled Composite Columns," Thin-Walled Structures, 17, 237-258, 1993.
K. Kelly and E. J. Barbero, "The effect of fiber damage on the longitudinal creep of CFMMC," Int. J. Solids Structures, 30(24), 3417-3429, 1993.
C. I. Chen, V. H. Mucino and E. J. Barbero, "Finite element vibration analysis of a helically wound tubular and laminated composite material beam," Computers and Structures, 49(3), 399-410, 1993.
E. J. Barbero, "3-D Finite Element for Laminated Composites with 2-D Kinematic Constraints," Computers and Structures, 45(2), 263-271, 1992.
E. J. Barbero and J. Tomblin, (1992) "Buckling Testing of Composite Columns," AIAA Journal TN, 30(11), 2798-2800, 1992.
E. J. Barbero and H. V. S. GangaRao, "Structural Applications of Composites in Infrastructure," Part II, SAMPE Journal, 28(1), 9-16, 1992.
E. J. Barbero, S-H Fu and I. Raftoyiannis, "Ultimate Bending Strength of Composite Beams," ASCE J. of Materials in Civil Engineering, 3(4), 292-306, 1991.
E. J. Barbero, "Pultruded Structural Shapes - From the Constituents to the structural behavior," SAMPE Journal, 27(1), 25-30, 1991.
L. A. Godoy, S. R. Idelsohn and E. J. Barbero, "On Load Interaction in the Non-Linear Buckling Analysis of Cylindrical Shells," Advanced Eng. Software TN, Vol. 13, No. 1, 46-50, 1991.
E. J. Barbero and H. V. S. GangaRao, "Structural Applications of Composites in Infrastructure," Part I, SAMPE Journal, 27(6), 9-16, 1991.
J. L. Teply, J. N. Reddy and E. J. Barbero, "Bending, Vibration and Stability of ARALL Laminates using a Generalized Laminate Plate Theory," Int. J. Solids Structures, 27(5), 585-599, 1991.
E. J. Barbero and J. N. Reddy, "Modeling of Delamination in Composites Laminates using a Layer-Wise Plate Theory," Int. J. Solid Structures, 28(3), 373-388, 1991.
E. J. Barbero and S. S. Sonti, "Micromechanical Models for Pultruded Composite Beams," AIAA-91-1045-CP, 124-129, 1991.
E. J. Barbero and T. N. Gopalakrishnan, "Eulerian Finite Element Formulation of the Fluid Mechanics in the Pultrusion Process," AIAA-91-1043-CP, 101-107, 1991.
E. J. Barbero, G. H. Kaufmann, and S. R. Idelsohn, "Fracture analysis of a surface-coated ceramic by speckle photography and finite elements," Optics and Laser Technology, 22(1), 17-22, 1990.
E. J. Barbero, J. N. Reddy, and J. L. Teply, "An Accurate Determination of Stresses in Laminated Plates," Int. J. for Numerical Methods in Engineering. 29, 1-14, 1990.
E. J. Barbero, J. N. Reddy, and J. L. Teply, "A General Two-Dimensional Theory of Laminated Cylindrical Shells," AIAA Journal, 28(3), 544-553, 1990.
E. J. Barbero and J. N. Reddy "The Jacobian Derivative Method for Three-dimensional Fracture Mechanics," Communications in Applied Numerical Methods, 6, 507-518, 1990.
E. J. Barbero and J. N. Reddy, "Nonlinear Analysis of Composite Laminates Using a Generalized Laminates Plate Theory," AIAA Journal, 28(11), 1987-1994, 1990.
J. N. Reddy, E. J. Barbero and J. L. Teply, "A Plate Bending Element Based on the Generalized Laminated Plate Theory," Int. J. Numerical Methods in Engineering, 28, 2275-2292, 1989.
G. Kaufmann, A. M. Lopergolo, S. Idelsohn, and E. J. Barbero, "Evaluation of Finite Element Calculations in a Part-Circular Crack by Coherent Optics Techniques," Experimental Mechanics, 27(2), 154-157, 1987.
1. Jing Xu, James G Hemrick, Mark Peters, Xingbo Liu, and Ever Barbero, Wetting and Reaction Characteristics of Al2O3/SiC Composite Refractories by Molten Aluminum and Aluminum Alloy, 31st ACS Cocoa Beach Conference, Jan. 2007.
2. Ever J. Barbero, Larry Banta, and Jacky Prucz, Outcome Portfolios as an Assessment Tool for ABET EC 2000 - A Four Year Study, ICEET, Kuwait, Nov. 8-11, 2007.
3. Xavier Martinez, Sergio Oller, Ever J. Barbero, New Approach to Simulate Laminate Composites by Coupling the Classical Lamination Theory with the Serial/Parallel Mixing Theory, ECCOMAS Thematic Conference on Mechanical Response of Composites P.P. Camanho et.al. (eds.) Porto, Portugal, 12–14 September 2007.
4. Joan Andreu Mayugo, Ever J. Barbero, and Daniel Trias, Meso-Mechanical Finite Element Modeling Of Fabric
5. Reinforced Composites, ECCOMAS Thematic Conference on Mechanical Response of Composites P.P. Camanho et.al. (eds.) Porto, Portugal, 12–14 September 2007.
Ever J. Barbero and Kevin J. Ford, Identification of Self-healing Model for Fiber Reinforced Polymer Composites, SECTAM XXIII, Mayaguez, PR, May 21-23, 2006.
Ever J. Barbero and Kevin Ford, Damage and Self Healing Behavior of Laminated Fiberglass Reinforced Polymer Composites, SES 2006, College Park, PA, Nov. 2006.
Ever J. Barbero, and Kevin J. Ford, Identification of Continuum Healing Mechanics for Polymer Matrix Composites, MACMAT 2005, Baton Rouge, LA, June.
Kevin J. Ford, and Ever J. Barbero, Identification of Continuum Healing Mechanics for Polymer Matrix Composites, SAMPE 2005, Anaheim, CA, April.
Z. Yao, B. S.-J. Kang, C. Feng, and E. J. Barbero, “Development Of An Indentation Method For Material Surface Mechanical Properties Measurement," June 2005 ICSSD.
X. Liu, J. Xu, N. Deem, K-M. Chang, E. Barbero, W-D. Cao, R. Kennedy & T. Carneiro: “Effect of Thermal-Mechanical Treatment on the Fatigue Crack Propagation Behaviors of Newly Developed Allvac 718Plus Alloy” Superalloys 718 and Derivatives 2005, TMS (October 2005) 233-242
X. Liu, C. Irwin, E. Barbero, B. Kang: “Minimizing Dross Buildup on Rotating Galvanizing Bath Hardware”, ILZRO-GAP 2005, (October 2005) Lexington, KY
Barbero, E. J., Banta, L., Prucz, J. and Stanley, C., Outcome Portfolios as an Assessment Tool for ABET EC-2000, ASEE, Salt Lake City, June.
E. J. Barbero, X. Liu, T. M. Damiani (WVU) and F. Goodwin (ILZRO), Current research on zinc pot hardware and molten metal containment, Galvanizers Association Annual Meeting.
J.M. Snider, J.L. Loth, E.J. Barbero, R. Kamil, Zinc-Pot Bearing Material Wear-Test Results Using the WVU Small-Scale Tester, Galvatech’04, Chicago
Barbero, E. J. and Ford, K, Equivalent Time Temperature Theory for Polymer Creep Modeling, SAMPE, CA, April
Barbero, E. J., Ford, K. and Stiller, A., Continuum Damage Healing Mechanics for Modeling of Self-Healing Composites, SAMPE, CA, April
Barbero, E. J., Mayugo-Majo, J. A., Lonetti, P., Three-Dimensional Continuum Damage Model For Polymer Matrix Composites, ASME IMECE-2004-59171, Anaheim, CA, Nov.
Barbero, E. J., Prucz, J., Banta, L., Stanley, C., Mukherjee, N., Abet Ec-2000 Assessment Using Outcome Portfolios, ASME IMECE-2004-59170, Anaheim, CA, Nov.
Barbero, E. J., Keynote Speaker, International Conference for Composites in Construction, Calabria, Italy, September.
Barbero, E. J., Liu, X., Irwin, C. Sikka, V. and Goodwin, F. 2003 AISE Annual Convention, Pittsburg, PA, September.
Barbero, E. J. and Lonetti, P. Application of Continuum Damage Healing Mechanics To Self-Healing Composites, ASME IMECE 2003-43738, Washington, DC, November 2003.
Barbero, E. J. and Kevin J. Ford, Accelerated Creep Testing of Trenchless Liners, ASCE IPC, Baltimore, MD, July 2003.
Barbero, E. J., Julius, M. and Yao, Z. Time and Frequency Viscoelastic Behavior of Commercial Polymers, CCC-2003, Calabria, Italy, September 2003.
Barbero, E. J., Ford, K. J., Julius, M. and Rangarajan, S. Equivalent Time Temperature Theory for Polymer Creep Modeling, ASME IMECE 2003 (oral presentation), Washington, DC, November 2003.
Barbero, E. J., Sikka, V. and Goodwin, F. Performance Evaluation of Current Hot-dip Pot Hardware Materials, Galvanizers Association Annual Meeting, Monterrey, Mexico, October 2003.
Barbero, E. “Improved Corrosion resistance of Galvanized Pot Hardware,” ZCO-15-2, Galvanized Auto-body partnership, Monterrey, Mexico, October 2003.
Ever J. Barbero and Ed Wen (March 2002), Coefficient of Thermal Expansion Compatibility Through Mechanical and Thermal Autofrettage in Metal Lined Composite Pipes, ASTM, Pittsburgh, PA.
Ed Wen, Ever Barbero, and Philip Tygielski, (April 2002) Autofrettage to Counteract Thermal Expansion Mismatch in Metal-Lined Composite Cryogenic Feed Lines, AIAA 2002-1524, SDM Conference, Denver, CO.
J. Trovillion, J. B. Berman and E. J. Barbero, (December 2002) A Novel Micromechanical Model for Woven Fabric Composite Materials Based on Homogenization with Periodic Microstructures, Paper AP-17, 23rd Army Science Conference, December 2-5, Orlando, FL.
Barbero, E. J. and Rangarajan, S. Proceedings of IPC2002: International Pipeline Conference, September 29 - October 3, 2002, Calgary, Alberta, Canada, paper #27064.
Barbero, E. J. and Ford, K. J. Accelerated Creep Testing Of Trenchless Liners, SAMPE Technical Conference, Baltimore, MD, 2002.
E. J. Barbero and J. Trovillion, Experimental Methods for Buckling and Post-Buckling of Composite Structural Shapes, ASC, Blacksburg, VA, Sept 9-12,2001.
E. J. Barbero, Prediction of the Interaction Constant for the Analysis of Composite Columns, Ottawa, Canada, August 2000.
L. A. Godoy and E. J. Barbero, Singapore, 2000.
E. J. Barbero, and S. Makkapati, Robust Design Optimization of Composite Structures, SAMPE 2000, Anaheim, CA.
E. J. Barbero and J. S. Harris, Prediction Of Long-Term Creep Of Composites From Doubly-Shifted Polymer Creep Data, 683-685, PACAM VI, Rio de Janeiro, Brazil, January 4-8, 1999.
J. C. Massa and E. J. Barbero, A Practical Formulation For Thin-Walled Composite Beams, 589-592, PACAM VI, Rio de Janeiro, Brazil, January 4-8, 1999.
P. Qiao, E. J. Barbero and J. F. Davalos, Analytical and Experimental Study of Creep Behavior of FRP Composite Shapes under Bending, 605-608, PACAM VI, Rio de Janeiro, Brazil, January 4-8, 1999.
P. Qiao, J. F. Davalos, E. J. Barbero and D. Troutman, Step-by-Step Engineering Design Equations for FRP Structural Beams, ICE'99, Cincinnati, OH, May 10-12, 1999. Best Paper of the design categroy and Best Paper overall for the conference.
E. J. Barbero and D. Troutman, Beam-Column Design Equations for Pultruded Structural Shapes, ICE'99, Cincinnati, OH, May 10-12, 1999.
E. J. Barbero and E. Wen, Accurate Compressive Strength of Production Parts without Compression Testing, ASTM Symposium on Composite Structures, Theory and Practice, Seattle, WA, May 17-18, 1999.
J. S. Harris and E. J. Barbero, Modeling Viscoelastic Effects Of Polymer Matrix Composites Using A Two Parameter Superposition Method, CDCC 98, Sherbrooke, Quebec, August 4-8, 1998.
J. F. Davalos, P. Qiao, E. J. Barbero, D. Troutman, and L. Galagedera, Design of FRP Beams in Engineering Practice, Int. Composites Exposition 98, pp. 12-E/1-6, SPI-CI, Nashville, TN, January 19-21, 1998.
L. A. Godoy, L. I. Almanzar, and E. J. Barbero, Post-Buckling and First-Ply Failure of Thin-Walled Frames and Columns Made of Composite Materials, Thin-Walled Structures: Research and Development, pp. 297-303, editor: N. E. Shanmugam, Elsevier (1998), II International Conference on Thin-Walled Structures, Singapore, December 2-4, 1998.
Caceres-Fernandez and E. J. Barbero, A Damage Mechanics Models for ACM-Wood Hybrid Beams, Pacam V, San Juan, P. P., January 2-4, 1997.
E. J. Barbero and D. Evans, Guidelines for Design of FRP Columns, ASCE Structures Congress, Portland, OR, April 13-16, 1997.
R. Lopez-Anido, H. V. S. GangaRao, and E. J. Barbero, FRP Modular System for Bridge Decks, ASCE Structures Congress, Portland, OR, April 13-16, 1997.
E. J. Barbero, et al., Reinforcement with ACM for Blast Loads, ASCE Structures Congress, Portland, OR, April 13-16, 1997.
P. Qiao, J. F. Davalos, and E. J. Barbero, Optimal Design of FRP Shapes for Structural Applications, ICCI'96, Tucson, AZ, 15-17 January 1996.
E. J. Barbero, J. Massa and J. S. Tomblin, Microbuckling Propagation Models for Compression Strength of Polymer Matrix Composites, ASME WAM, Atlanta, GA, 17-23 November 1996.
L. A. Godoy, E. J. Barbero, and I. Raftoyiannis, Post-Buckling Analysis of Composite FRP Structures, PACAM, Buenos Aires, Argentina, January 3-6, 1995.
E. J. Barbero, Compression Strength of Fiber Reinforced Composites, PACAM, Buenos Aires, Argentina, January 3-6, 1995.
S. S. Sonti, E. J. Barbero, and T. Winegardner, Mechanical Properties of Pultruded E-Glass/Vinyl Ester Composites, 50th Annual Conference, Composites Institute, The Society of the Plastics Industry, pp. 10-C/1-7, Feb. 1, 1995.
E. J. Barbero, J. S. Tomblin, R. Allison, J. Gauchel, and J. Mitrey, Compression Strength of Pultruded RP Rods, 50th Annual Conference, Composites Institute, The Society of the Plastics Industry, pp. 4-B/1-5, Feb. 1, 1995.
E. J. Barbero, D. Evans, and S. Makkapatti, Buckling and Shear Tests Methods and Design Equations for Pultruded Shapes, NSF Sponsored First National Conference and Workshop on Research into Practice, Cristal City, VA, June 15-16, 1995.
H. A. Salim, J. F. Davalos, P. Qiao, and E. J. Barbero, Experimental and analytical evaluation of laminated composite box beams, 40th Int. SAMPE Symposium, May 8-11, 1995, Anaheim, CA.
J. S. Tomblin and E. J. Barbero, Compression Strength of Pultruded Fiber Reinforced Composites, pp. 74-77, 10th ASCE Engineering Mechanics Conference, Boulder, CO, May 21-24, 1995.
H. A. Salim, J. F. Davalos, E. J. Barbero, R. Lopez-Anido, and P. Quiao, Design of FRP Shapes for Civil Structures, pp. 405-408, 10th ASCE Engineering Mechanics Conference, Boulder, CO, May 21-24, 1995.
R. Zinno and E. J. Barbero, Nonlinear Analysis of Laminated Composite Structures Using a Layerwise Theory, pp. 537-540, 10th ASCE Engineering Mechanics Conference, Boulder, CO, May 21-24, 1995.
S. S. Sonti, E. J. Barbero, and T. Winegardner, Determination of Shear Properties for RP Pultruded Composites, 49th Annual Conference, Composites Institute, The Society of the Plastics Industry, pp. 2-A/1-5, Feb. 7-9, 1994.
Scott R. Taylor and Ever J. Barbero, Tension Rod End Attachments Formed via Reforming Pultruded Thermoplastic Composite Rods, 49th Annual Conf., Composites Institute, The Society of the Plastics Industry, pp. 14-B/1-3, Feb. 7-9, 1994. Best Advanced Composites Paper Award
Barbero, E. J., Luciano, R., and Sacco, E., Applications of Composites in Civil Engineering, International Conference on Composite Materials, May 3-5, 1994, Milan, Italy.
Godoy, L. A., and Barbero, E. J., "Stability of Composite FRP Columns," Joint EPSCOR and AAAS Annual Meeting, University of Puerto Rico, Mayaguez, PR, May 6-7, 1994.
Godoy, L. A., Barbero, E. J., and Raftoyiannis, I., 1995, Post-Buckling Analysis of Composite FRP Structures, Proceedings Pan American Congress of Applied Mechanics, Buenos Aires January 3-6, 1995.
Barbero, E. J., 1995, Compression Strength of Pultruded Fiber Reinforced Composites, Proceedings Pan American Congress of Applied Mechanics, Buenos Aires January 3-6, 1995.
Barbero, E. J., and Davalos, J. F., 1994, Bond strength of FRP-wood interface: model and experiments, XXIII AIAS Conference, Rende, Italy, 21-24, 1994.
Barbero, E. J., 1994, Pultruded Structural Shapes: A State of the Art Keynote Lecture at XXIII AIAS Conference, Rende, Italy, 21-24, 1994.
Barbero, E. J. and Tomblin, J., 1994, Compression Strength of Pultruded FRP Materials, 1994 ASCE Materials Engineering Conference, November 13-16, San Diego, CA, 1994.
Faza, S, H. GangaRao, and E. J. Barbero (speaker), Fiber Composite Wrap for Rehabilitation of Concrete Structures, Invited Lecture at the Conference-Workshop Repair and Rehabilitation of the Infrastructure of the Americas, Mayaguez, PR, August 29-31, 1994.
K. Kelly and E. Barbero, "Longitudinal creep and strength of continuous fiber MMCs," 38th Int. SAMPE Symposium, Anaheim, CA, May 8-13, 1993.
P. Burnside, E. Barbero, J. Davalos, and H. GangaRao, "Design optimization of an all-FRP bridge," 38th Int. SAMPE Symposium, Anaheim, CA, May 8-13, 1993.
E. Barbero and J. Tomblin, "Compressive strength models for pultruded fiber reinforced composites," 38th Int. SAMPE Symposium, Anaheim, CA, May 8-13, 1993.
P. Burnside, E. Barbero, and J. Davalos, "Design optimization of an all-composite short-span bridge," ASCE Structures Congress, Irvine, CA, April, 1993.
E. J. Barbero and R. Ritchey, "A Universal Design Equation for FRP Columns," 48th Annual Conference, Composites Institute, The Society of Plastics Industry, Inc., February 8-11, 1993.
P. Burnside and E. Barbero, "Design optimization of an All-FRP Bridge," ANSYS Technical Note, April 1993.
E. Barbero, I. Raftoyiannis, and L. Godoy, "Mode interaction in FRP columns," in Mechanics of Composite Materials: Nonlinear Effects, Ed. M. H. Hyer, AMD-Vol. 159, 9-18, ASME, New York, 1993.
E. Barbero and K. Kelly, "Predicting longitudinal creep and strength of a continuous fiber metal matrix composite," in Mechanics of Composite Materials: Nonlinear Effects, Ed. M. H. Hyer, AMD-vol 159, ASME, New York, 1993.
J. F. Davalos, E. J. Barbero, U. Munipalle, and H. Salim, "Interface bond strength of laminated wood-FRP composite beams," 25 Int. SAMPE Technical Conference, October 26-28, 1993, Philadelphia, PA.
E. J. Barbero, "Composites in Construction," Keynote Speaker, 25 Int. SAMPE Technical Conference, October 26-28, 1993, Philadelphia , PA.
Raftoyiannis, and E. J. Barbero, "Lateral-distortional buckling of fiber reinforced beams," 1993 ASME Winter Annual Meeting, New Orleans, LA, November 1993, AD-Vol 37, AMD-Vol 179, 219-227.
E. J. Barbero and J. Tomblin, "Data reduction methods for local buckling of FRP columns," 10th Structures Congress, ASCE, San Antonio, April 13-15, 1992.
E. J. Barbero, J. Tomblin and R. Ritchey, "Local buckling of FRP structural shapes," 47th Annual Conference, Composites Institute, The Society of Plastics Industry, Inc., February 3-6, 1992.
E. J. Barbero, J. Davalos, P. Burnside, and H. V. S. GangaRao, IV Workshop on Bridge Engineering Research in Progress, Reno, Nevada, 1992.
Sotiropoulos S., H. V. S. GangaRao and E. J. Barbero, "Static Response of Bridge Superstructures made of Fiber Reinforced Plastic," Use of Composite Materials In Transportation Systems, AME-Vol. 29, 57-66, S.B. Biggers and T-W Chou Ed., ASME, N.Y., 1991.
E. J. Barbero, "3-D Finite Element Modeling of Laminated Composites by Layer-Wise Constant Shear Elements, " in Enhancing Analysis Techniques for Composite Materials, NDE-Vol. 10, 229-237, Schwer, Reddy, and Mal Ed., ASME, N.Y., 1991.
J. Davalos and E. J. Barbero, "A Constitutive Model for Glulam-Timber/Glass-FRP Beams," with J. F. Davalos, Third International Conference on Constitutive Laws for Engineering Materials, Tucson, Arizona, January 1991.
J. Davalos and E. J. Barbero, "Development of Composite Glulam-GFRP Beams," with J. Davalos, Second Pan American Congress of Applied Mechanics, January 2-5, 1991, Valparaiso, Chile.
E. J. Barbero, "Timoshenko Beam Stiffnesses for Laminated Structural Shapes," Nineth ASCE Structures Congress, April 29-May 1st, 1991, Indianapolis, Indiana.
E. J. Barbero, "A New Finite Element formulation of GLPT," ASCE Eng. Mech. Specialty Conf. Mech. Computing in 1990's and Beyond, May 19-22, 1991, Columbus, OH, H. Adeli and R. L. Sierakowski Ed.
E. J. Barbero, "Pultruded Structural Shapes: Stress Analysis and Failure Prediction," Advanced Composite Materials in Civil Engineering Structures, S. L. Iyer Ed., ASCE, N. Y., pp. 194-204, 1991.
E. J. Barbero, "Optimization of Pultruded Composite Beams and Columns," 36th Int. SAMPE Symposium, 1343-1354, 36(2), 1991.
E. J. Barbero and H. V. S. GangaRao, Characterization and Modeling of Glass Fiber Reinforced Structural Components and Systems, II Workshop on Bridge Engineering Research in Progress, Reno, Nevada, October 29-30, 1990.
E. J. Barbero and S-H. Fu, "Local Buckling as Failure Initiation on Pultruded Composite Beams," Impact and Buckling of Structures, Ed. D. Hui, ASME AD-Vol. 20, AMD-Vol. 114, 41-46, 1990.
E. J. Barbero and I. Raftoyiannis, "Buckling Analysis of Pultruded Composite Columns," Impact and Buckling of Structures, Ed. D. Hui, ASME AD-Vol. 20, AMD-Vol. 114, 47-52, 1990.
E. J. Barbero, "Characterization and Modeling of Glass Fiber Reinforced Plastic Beams and Columns," Second Workshop on Bridge Engineering Research in Progress, Reno, Nevada, October, 1990.
J. N. Reddy and E. J. Barbero, "Modeling of Delamination in Composites Laminates using a Layer-Wise Plate Theory," INDO-U.S. Workshop on Composites for Aerospace Applications, Indian Institute of Science, Bangalore, India, July 23-27, 1990.
E. J. Barbero and J. N. Reddy, "A Study of Delamination Buckling in Composite Laminates Using the Generalized Laminated Plate Theory," presented at SECTAM XV, Atlanta, GA, March 1990.
E. J. Barbero, H Fu, J. Prucz, and C. Spyrakos, "Structural Performance of I-Beams made of Fiber Reinforced Plastics (FRP)," ASCE Structures Congress, Baltimore, MD, March 1/5, 1990.
E. J. Barbero and J. N. Reddy, "Vibrations of Laminated Composite Plates Using a Generalized Laminated Plate Theory", AD/Vol. 14, 35/40, ASME Winter Annual Meeting, San Francisco, CA, December 10/15, 1989.
J. N. Reddy, J. L. Teply, and E. J. Barbero, "An Accurate Determination of Stresses in ARALL Laminates Using a Generalized Laminated Plate Theory", ASCE/ASME AMD Vol. 100, pp. 55/62, Third ASCE/ASME Joint Mechanics Conference, San Diego, CA, July 9/12, 1989.
General Nonlinear Theory of Laminated Anisotropic Composite Plates", with J. N. Reddy and J. L. Teply, Proceedings of the First USSR/US Symposium on Mechanics of Composite Materials, ed. by S. W. Tsai, Riga, Latvian USSR, May 23/26, 1989.
"A Plate Bending Element Based on the Generalized Laminated Plate Theory (Implementation into ABAQUS Computer Program)", Center for Composite Material and Structures Report, CCMS/89/08, VPI/E/89/02, 1989.
J. N. Reddy and E. J. Barbero, "Nonlinear Analysis of Composite Plates using the Generalized Laminate Plate Theory", Proceedings of the VIth Annual Review of the Center for Composite Materials and Structures, Blacksburg, VA, April 9/11, 1989.
J. N. Reddy and E. J. Barbero, "A Computational Model for the Study of Local Effects", presented at International Conference on Engineering Software 89, New Delhi, India, December 4/7, 1989.
E. J. Barbero and J. N. Reddy, "An Application of the Generalized Laminate Plate Theory to Delamination Buckling", presented at the IVth Technical Conference of the American Society of Composites, Blacksburg, VA, October, 1989.
E. J. Barbero and J. N. Reddy, "An Application of the Generalized Laminate Plate Theory to Delamination Buckling", presented at the IVth Technical Conference of the American Society of Composites, Blacksburg, VA, October, 1989.
E. J. Barbero and J. N. Reddy, "A Generalized Laminated Theory for the Analysis of Composite Laminates, Center for Composite Material and Structures Report, CCMS/88/12, VPI/E/88/17, 1988.
J. N. Reddy, J. L. Teply, and E. J. Barbero, "On Analytical Modeling of Thick Composites", Third International Conference on CAD/CAM Robotics and Factories of the Future, MI, August 14/17, 1988.
J. N. Reddy, and E. J. Barbero, "A Variational Principle and Associated Computational Model for the Generalized Laminate Plate Theory", ASCE Engineering Mechanics Division Specialty Conference, Blacksburg, VA, May 22/25, 1988.
E. J. Barbero and J. N. Reddy, A General Nonlinear Theory of Laminated Anisotropic Composite Plates", Proceedings of the IVth Annual Review of the Center for Composite Material and Structures, Blacksburg, VA, April 11/14, 1987.
E. J. Barbero, "A Modified Arc-Length Method for the Solution of Nonlinear Systems", IVth National Conference on Finite Elements and its Applications, ENIEF' 86, Bariloche, Argentina, July 9/13, 1986.
G. Kaufmann, S. Idelsohn and E. J. Barbero, "Evaluation of Finite Element Calculations on a Curved-Fronted Crack by Coherent Optics Techniques", Proceedings of the VIIIth International Conference on Experimental Stress Analysis, Ed. by H. Wieringa, Amsterdam, The Netherlands, 370/386, 1986.
E. J. Barbero, "Three-dimensional Analysis of Curved-Fronted Cracks using the Finite Element Method", First Latin American Congress of Computational Mechanics, MECOM '85, Parana, Argentina, October 15/18, 1985.
E. J. Barbero, "Composite Pressure Vessel for CNG Storage, Analysis and Design", IIIth National Conference on Finite Elements and its Applications, ENIEF '85, Bariloche, Argentina, July 8/12, 1985.
Barbero, E. J., Buckling of FRP Columns, Final Report to Creative Pultrusions, Inc., May 1992. 194 pages.
Brown, B. B. (1998) Design Analysis of Single-Span Advanced Composite Deck-And-Stringer Bridge Systems, Thesis, West Virginia University, Morgantown, WV 26506. (1998)
Caceres, A. (1998) Local Damage Analysis of Fiber Reinforced Polymer Matrix Composites, Dissertation, West Virginia University, Morgantown, WV 26506.
Barbero, E. J. (1999) Development and Evaluation of Glass Fiber Reinforced Composites/Wood Railroad Crossties Phase II Task 5 Continuous Damage Mechanics, Final Report to FRA. (PDF 592KB)
Turk, M. (1998) Experimental Validation of Beam-Column Design Equation, Thesis, West Virginia University, WV 26506.
Barbero, E. J. Compressive Strength of FRP Materials, Final Report (5/16/98), Task B4, WVDOH Contract SPN-T-699-FRP-1, FPN-9420(001). Not released for publication at this time.
Sonti, S. Stress Analysis of Pultruded Structural Shapes, MS Thesis, 1992. 159 pages.
Makkapati, S., Compressive Strength of Pultruded Structural Shapes, MS Thesis, 1994. 241 pages.
Barbero, E. J., On a Generalized Laminate Theory … , PhD Dissertation, 1989. 306 pages.
Bodine, M., A General Solution to First Order Shear Deformation Theory in Laminated Composite Plates, MS Thesis, 1997. 99 pages.
Wen, Ed. (1999) Compressive Strength Prediction for Composite Unmanned Aerial Vehicles, MSAE Thesis.
Messick, S., (1996) Adhesive Selection And Evaluation For Strengthening Steel Stringer Bridges Using CFRP, Thesis, West Virginia University.
Damiani, Thomas Miles, (2000) A Model to Predict the Long-Term Strength of E-glass Fiber Composites Subjected to Environmental Exposure, MS Thesis, West Virginia University.
Raftoyiannis, J. (1994) Buckling Mode Interaction in FRP Columns, Dissertation, 244 pages, 7638KB PDF.
Burnside, P. (1987) Design Optimization of Fiber-Reinforced Composite-Material Guideway for MAGLEV, Thesis, 154 pages, 5466KB PDF.
Barbero, E. J. 4/28/2000, FRP Beam-Column Design Equations, RP131, WVDOH.
Abdelal, G. F. (2000) A three-phase constitutive model for macrobrittle fatigue damage of composites, Ph.D. West Virginia University.
Davalos, J. F. , Barbero, E. J., and Qiao, P. Z. (1999) "Step-by-Step Engineering Design Equations for Fiber-reinforced Plastic Beams for Transportation Structures.” Contract RP#147 West Virginia Division of Highways, WV.
Fox, Matthew, 11/14/2002, Numerical Modeling of Air Blast Effects on Hybrid Structures, MS Thesis, West Virginia University.
Ford, Kevin John (2002) Aging Model for Commercial Polymers, Thesis, West Virginia University.
Rangarajan, Shalini (2001) Long-Term Creep Of Encased Polymer Liners, Thesis, West Virginia University.
Barbero, E. J. (2003) Evaluating Trenchless Pipelining Technologies, Final Report, FHWA-PA-2003-003-97-04(103), Pennsylvania Department of Transportation.
Damiani, T. (2003) Mesomechanics of Fabric Reinforced Composites, Dissertation, WVU.
Julius, M. (2003) Time Temperature and Frequency Viscoelastic Behavior of Commercial Polymers, Thesis, WVU.
Pasumarty, Suresh (2003) Permeability and Strength of Artificially Controlled Porous Media, Thesis, WVU.
Sikkil, Kaarthik (2003) Finite Element Damage Modeling of Plain Weave Fabrics, Thesis, WVU.
Santosh Kumar Pagadala Eswar Dass (2004) Portable Implementation Of Computer Aided Design Environment For Composite Structures, Thesis, WVU. Implementation: cadec
Mechanical and Aerospace Engineering Graduate Programs, University of Puerto Rico, Mayagues, PR, April.
Mechanical and Aerospace Engineering Graduate Programs, Polytechnic University of San Juan, San Juan, PR, April.
Prediction of Ageing Effects on Polymer Matrix Composites, CIMNE, Polytechnic University of Catalunya, September.
Prediction of Ageing Effects on Polymer Matrix Composites, Carlos III University, Leganes, Madrid, Spain, September.
Mechanical and Aerospace Engineering Graduate Programs, National University of Rio Cuarto (UNRC), Argentina, April 2004.
Mechanical and Aerospace Engineering Graduate Programs, University of Puerto Rico, Mayagues, PR, December.
Mechanical and Aerospace Engineering Graduate Programs, Polytechnic University of San Juan, San Juan, PR, December.
Mechanical and Aerospace Engineering Graduate Programs, Universidad de los Andes, Colombia, February.
Mechanical and Aerospace Engineering Graduate Programs, National University of Colombia-Bogota , Colombia, February.
Mechanical and Aerospace Engineering Graduate Programs, Universidad Del Valle-Cali, Colombia, February.
Mechanical and Aerospace Engineering Graduate Programs, Pontificia Bolivariana University of Medellin, Colombia, February.
Mechanical and Aerospace Engineering Graduate Programs, Universidad de Cordoba, Argentina, April.
Mechanical and Aerospace Engineering Graduate Programs, Universidad de Trujillo, Peru, April.
Mechanical and Aerospace Engineering Graduate Programs, Universidad de Ingenieria, Lima, Peru, April.
Mechanical and Aerospace Engineering Graduate Programs, Universidad Catolica de Lima, Peru, April.
Mechanical and Aerospace Engineering Graduate Programs, Universidad Catolica Santa Maria, Arequipa, Peru, April.
Mechanical and Aerospace Engineering Graduate Programs, Universidad Nacional, Arequipa, Peru, April.
Mechanical and Aerospace Engineering Graduate Programs, Universidad Nacional de Rio Cuarto, Argentina, Jan-2006
Mechanical and Aerospace Engineering Graduate Programs, Universidade Federal do Rio Grande do Sul (UFRGS), Porto Alegre, RS, Brasil, Nov-2005
Mechanical and Aerospace Engineering Graduate Programs, Instituto Tecnológico de Aeronáutica (ITA), Divisão de Engenharia Mecânica-Aeronáutica, São José dos Campos – SP, Brasil Nov-2005
Mechanical and Aerospace Engineering Graduate Programs, Universidade Federal do Nord (UFN), Natal, RN, Brasil Nov-2005
Mechanical and Aerospace Engineering Graduate Programs, Universidade Federal de Alagoas (UFAL), Maceio-Alagoas, Brasil Nov-2005
Capstone Design at WVU, International Capstone Design Exposition, Taegu, Korea, November 2006
Mechanical and Aerospace Engineering Graduate Programs, Kuwait University, Kuwait, Nov. 8-11, 2007.
Mechanical and Aerospace Engineering Graduate Programs, Satellite Structure Design Office, Egyptian Space Program, Ministry of Scientific Research, Nov. 12-13, 2007.
Mechanical and Aerospace Engineering Graduate Programs, UBA, Argentina, Jun 14, 2007.
Updated: November 14, 2007